Static Objects - Lexus NX300 Owner's Manual

226
4-5. Using the driving support systems
System initialization may not have been
●
performed after removal and installation
of the battery. Perform system initializa-
tion.
■ When "Parking Support Brake Mal-
function Visit Your Dealer" is displayed
on the multi-information display, the
PKSB OFF indicator flashes and the
buzzer sounds
The system may not be operating properly.
Have the vehicle inspected by your Lexus
dealer.
WARNING
In order for the system to operate
■
properly
Make sure to observe the following pre-
cautions regarding the sensors
(→P.218). Failure to observe these pre-
cautions may cause the sensors not to
operate properly, and may result in an
unexpected accident.
● Do not perform work such as modifi-
cation, disassembly or painting
● Only perform replacements using
genuine parts
Do not subject the area around the
●
sensors to any impacts
Do not damage the sensors, and
●
always keep them clean
Handling the suspension
■
Do not modify the suspension, as
changes to the height or incline of the
vehicle may prevent the sensors from
correctly detecting obstacles, may cause
the system not operate, or may cause the
system to operate unnecessarily.
LEXUS NX300
al_USA_OM78211U
Owners Manu-
NOTICE
Preventing unnecessary operation
■
In the following situations, turn the Park-
ing Support Brake function (for static
objects) OFF. The system may operate
even though there is no possibility of a
collision.
● A chassis roller, chassis dynamo, free
roller or similar equipment is being
used for an inspection, etc.
● The vehicle is being loaded onto a ship,
truck or other transport vessel
The suspension has been lowered or
●
tires that have a different size than the
genuine tires are equipped
The height of the vehicle has drastically
●
changed due to the carried load (the
nose tilts up or down).
● A towing hook is installed
Display and buzzer for engine
output restriction control and
brake control
When the engine output restriction
control or brake control operates, the
buzzer sounds and a message is dis-
played on the multi-information display
to alert the driver.
Depending on the situation, output restric-
tion control operates to either limit accel-
eration or restrict output as much as
possible.