Event Sysmgr - Cisco nexus 3000 series Command Reference Manual

event sysmgr

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
event sysmgr
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of the
system manager event, use the event sysmr command. To remove the system manager event criteria, use
the no form of this command.
Syntax Description memory
major
major-percent
minor
minor-percent
clear clear-percent (Optional) Sets the percentage of memory that needs to be cleared. The range is
module
module-number
switchover
count count
time time-interval
Defaults None
Command Modes Embedded event manager configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines This command does not require a license.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-72
event sysmgr [memory [major major-percent minor minor-percent clear clear-percent | module
module-number] | switchover count count time time-interval]
no event symgr
(Optional) Specifies the memory alert event.
(Optional) Sets the major memory threshold. The range is from 1 to 99.
(Optional) Sets the minor memory threshold. The range is from 1 to 99.
from 1 to 99.
(Optional) Specifies the module number. The module number range is from 1 to 1.
(Optional) Specifies the switchover-related events.
(Optional) Specifies the number of switchovers after which the event should be
triggered. The range is from 1 to 65000.
(Optional) Specifies the time interval within which the events need to happen.
The range is from 1 to 4294967295.
Modification
This command was introduced.
Chapter System Management Commands
OL-29557-04