Event Policy-Default - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

event policy-default

To configure an event in case a system policy is being overridden, use the event policy-default
command. To use the overridden policy, use the no form of this command.
Syntax Description
count count
time seconds
Defaults None
Command Modes Embedded event manager configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure an event in case a system policy is being overridden:
switch# configure terminal
switch(config) event manager applet cli-event
switch(config-applet)# event policy-default count 15 time 1500
switch(config-applet)#
OL-29557-04
event policy-default count count time seconds
no event policy-default count count time seconds
Specifies the number of matching occurrences before a default event is triggered.
The range is from 1 to 65000.
Specifies the interval in seconds, within which the events need to happen. The
range is from 0 to 4294967295.
Modification
This command was introduced.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
event policy-default
-SM-65