Mpls Strip Dest-Mac - Cisco nexus 3000 series Command Reference Manual

mpls strip dest-mac

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
mpls strip dest-mac
To configure the destination MAC address for stripped egress frames, use the mpls strip dest-mac
command. To delete the configured destination MAC address, use the no form of this command.
Syntax Description
mac-address
Command Default None
Command Modes Global configuration mode
Command History Release
6.0(2)U2(5)
Examples This example shows how to configure the destination MAC address for egress frames:
switch# configure terminal
switch(config)# mpls strip dest-mac 1.1.1
Related Commands Command
mpls strip
clear mpls strip label
dynamic
mpls strip label
mpls strip label-age
show mpls strip labels Displays MPLS label configuration.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-122
mpls strip dest-mac mac-address
no mpls strip dest-mac mac-address
Specifies the destination MAC address for egress frames that are stripped of
their headers.
The MAC address can be specified in one of the following four forms:
•
•
•
•
Modification
This command was introduced.
Description
Enables the MPLS stripping feature.
Clears dynamic label entries.
Adds or deletes static MPLS labels.
Configures MPLS label aging.
E.E.E
EE-EE-EE-EE-EE-EE
EE:EE:EE:EE:EE:EE
EEEE.EEEE.EEEE
Chapter System Management Commands
OL-29557-04