Diagnostic Bootup Level - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

diagnostic bootup level

To configure the bootup diagnostic level to trigger diagnostics when the device boots, use the diagnostic
bootup level command. To remove bootup diagnostic level configuration, use the no form of this
command.
Syntax Description
bypass
complete
Command Default Complete
Command Modes Global configuration mode
Command History Release
5.0(3)U1(1)
Examples This example shows how to configure the bootup diagnostics level to trigger the complete diagnostics:
switch# configure terminal
switch(config)# diagnostic bootup level complete
switch(config)#
This example shows how to remove the bootup diagnostics level configuration:
switch# configure terminal
switch(config)# no diagnostic bootup level complete
switch(config)#
Related Commands Command
show diagnostic
bootup level
show diagnostic
bootup result
OL-29557-04
diagnostic bootup level {bypass | complete}
no diagnostic bootup level {bypass | complete}
Specifies that all bootup tests are skipped.
Specifies that all bootup diagnostics are performed. This is the default
value.
Modification
This command was introduced.
Description
Displays the bootup diagnostics level.
Displays the results of the diagnostics tests.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
diagnostic bootup level
-SM-49