Ntp Commit - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

ntp commit

To apply the pending configuration pertaining to the Network Time Protocol (NTP) distribution session
in progress, use the ntp commit command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration mode
Command History Release
6.0(2)U2(1)
Examples
This example shows how to commit changes to the active NTP configuration:
switch# configure terminal
switch(config)# ntp commit
switch(config)#
Related Commands Command
ntp distribute
show ntp
OL-29557-04
ntp commit
Modification
This command was introduced.
Description
Enables CFS distribution for NTP.
Displays NTP information.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
ntp commit
-SM-137