Feature Ptp - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

feature ptp

To enable the Precision Time Protocol (PTP) feature, use the feature ptp command. To disable the PTP
feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.0(3)U2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the PTP feature:
switch# configure terminal
switch(config)# feature ptp
switch(config)#
This example shows how to disable the PTP feature:
switch# configure terminal
switch(config)# no feature ptp
switch(config)#
Related Commands Command
ptp source
ptp domain
ptp priority1
ptp priority2
OL-29557-04
feature ptp
no feature ptp
Modification
This command was introduced.
Description
Configures the source IP address for all PTP packets.
Configures the domain number to use for this clock.
Configures the priority1 value to use when advertising this clock.
Configures the priority2 value to use when advertising this clock.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
feature ptp
-SM-77