Event Oir - Cisco nexus 3000 series Command Reference Manual

event oir

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
event oir
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of an
Online-Insertion-Removal (OIR), use the event oir command. To remove the OIR event criteria, use the
no form of this command.
Syntax Description fan
anyoir
insert
remove
module
powersupply
tag tag
Defaults None
Command Modes
Embedded event manager configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to specify that an EEM applet runs when an OIR occurs:
switch# configure terminal
switch(config) event manager applet cli-event
switch(config-applet)# event oir
switch(config-applet)#
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-64
event oir {fan [anyoir | insert | remove] | module [anyoir | insert | remove] | powersupply [anyoir
| insert | remove] | tag tag}
no event oir {fan [anyoir | insert | remove] | module [anyoir | insert | remove] | powersupply
[anyoir | insert | remove] | tag tag}
Specifies a fan OIR event.
(Optional) Specifies any OIR event.
(Optional) Specifies the OIR insert event.
(Optional) Specifies the OIR remove event.
Specifies the module OIR event.
Specifies a power supply OIR event.
Identifies this specific event when multiple events are included in the policy. The
tag name can be any alphanumeric string up to 29 characters.
Modification
This command was introduced.
fan remove 1
Chapter System Management Commands
OL-29557-04