Ipv6 Pim-Sm Non-Scoped Zone Configuration Example - HP VSR1000 Configuration Manual

UpTime: 00:01:24
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: ACT
UpTime: 00:01:20
Upstream interface: GigabitEthernet1/0/2
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
# Display IPv6 PIM multicast routing table information on Router D.
[RouterD] display ipv6 pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:02:19
Upstream interface: GigabitEthernet1/0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 2
1: GigabitEthernet1/0/2
2: GigabitEthernet1/0/4
The output shows the following information:
•
Routers on the SPT path (Router A and Router D) have the correct (S, G) entries.
•
Router A has the correct (*, G) entry.

IPv6 PIM-SM non-scoped zone configuration example

Network requirements
As shown in
•
OSPFv3 runs on the network.
•
VOD streams are sent to receiver hosts in multicast. The receivers of different subnets form
stub networks, and a minimum of one receiver host exist in each stub network. The entire IPv6
PIM-SM domain contains only one BSR.
Protocol: mld, UpTime: 00:01:20, Expires: -
Protocol: pim-dm, UpTime: 00:01:20, Expires: -
Protocol: pim-dm, UpTime: 00:02:19, Expires: -
Protocol: pim-dm, UpTime: 00:02:19, Expires: -
Figure 95:
308