HP VSR1000 Configuration Manual page 315

# Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM on Router B and Router C in the same
way Router A is configured. (Details not shown.)
# On Router D, enable IPv6 multicast routing, and enable IPv6 PIM-DM on each interface.
<RouterD> system-view
[RouterD] ipv6 multicast routing
[RouterD-mrib6] quit
[RouterD] interface gigabitethernet 1/0/1
[RouterD-GigabitEthernet1/0/1] ipv6 pim dm
[RouterD-GigabitEthernet1/0/1] quit
[RouterD] interface gigabitethernet 1/0/2
[RouterD-GigabitEthernet1/0/2] ipv6 pim dm
[RouterD-GigabitEthernet1/0/2] quit
[RouterD] interface gigabitethernet 1/0/3
[RouterD-GigabitEthernet1/0/3] ipv6 pim dm
[RouterD-GigabitEthernet1/0/3] quit
[RouterD] interface gigabitethernet 1/0/4
[RouterD-GigabitEthernet1/0/4] ipv6 pim dm
[RouterD-GigabitEthernet1/0/4] quit
Verifying the configuration
# Display IPv6 PIM information on Router D.
[RouterD] display ipv6 pim interface
Interface
GE1/0/1
GE1/0/2
GE1/0/3
GE1/0/4
# Display IPv6 PIM neighboring relationship on Router D.
[RouterD] display ipv6 pim neighbor
Total Number of Neighbors = 3
Neighbor
FE80::A01:101:1 GE1/0/2
FE80::B01:102:2 GE1/0/3
FE80::C01:103:3 GE1/0/4
# Send an MLD report from Host A to join IPv6 multicast group FF0E::101. (Details not shown.)
# Send IPv6 multicast data from IPv6 multicast source 4001::100/64 to IPv6 multicast group
FF0E::101. (Details not shown.)
# Display IPv6 PIM multicast routing table information on Router A.
[RouterA] display ipv6 pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, FF0E::101)
Protocol: pim-dm, Flag: WC
NbrCnt HelloInt
0 30
0 30
1 30
1 30
Interface
DR-Pri DR-Address
1 FE80::A01:201:1
(local)
1 FE80::A01:201:2
(local)
1 FE80::A01:201:3
(local)
1 FE80::A01:201:4
(local)
Uptime Expires Dr-Priority
00:04:00 00:01:29 1
00:04:16 00:01:29 3
00:03:54 00:01:17 5
307