Download Print this page
TP-Link TL-WA801ND Installation Manual
Hide thumbs Also See for TL-WA801ND:

Advertisement

Quick Links

Connect to the Access Point with
the Ethernet cable or via wireless.
The default SSID of the Access
Point is TP-LINK_ XXXXXX. The
XXXXXX is the last 6 characters
of the Access Point's MAC
address.
Plug the provided power adapter
into the power jack on the back of
the Access Point, and the other
end to a standard electrical wall
socket. Then press the QP1QHH
button to power on the device.
If the distance between the outlet and the Access Point is too long to supply
Note
the power, you can refer to the Power over Ethernet (PoE) solution in
Crrgpfkz"C<"Ykvj"RqG"Ugvwr on rcig"350
Turn on all of your network devices and then check to see if the LEDs on the
Access Point display normally as the diagram below describes.
Uqnkf"nkijv"
Hncujkpi"
Uqnkf"nkijv"qt"hncujkpi"
Hncujkpi" kh" vjg" Yktgnguu"
Tcfkq"hwpevkqp"ku"gpcdngf
If the LEDs display abnormally, please check to see if all the cable
Note
connectors (power adapter and Ethernet cable) are well connected to your

device.
1

Advertisement

loading

Summary of Contents for TP-Link TL-WA801ND

  • Page 1 Connect to the Access Point with the Ethernet cable or via wireless. The default SSID of the Access Point is TP-LINK_ XXXXXX. The XXXXXX is the last 6 characters of the Access Point’s MAC address. Plug the provided power adapter into the power jack on the back of the Access Point, and the other end to a standard electrical wall...
  • Page 2 " Nqikp Open your web browser, type in 3;4038:020476 in the address bar and press Gpvgt. A dialog box will prompt you for the Wugt" pcog and Rcuuyqtf. Enter the default values and click QM. Wugt"pcog<"cfokp" Rcuuyqtf<"cfokp" Click QM" If the dialog box does not pop up, please refer to V5 in Vtqwdngujqqvkpi"on Note rcig"32"to assign a static IP address 192.168.0.100 for your computer.
  • Page 3 The Operation Mode page will appear then. The TL-WA801ND supports up to five operation modes. You can refer to the HELP page to know more about the five modes. Select the operation mode based on your need." Click Pgzv" For Ceeguu"Rqkpv"mode, please refer to part C"qp"rcig"5.
  • Page 4 1. Create an easy-to-remember name for your wireless network here. 2. Select Tgikqp and Ejcppgn for your device. 3. Select Oquv"Ugewtg"*YRC1YRC4/RUM+ mode and enter a wireless password below to prevent unauthorized access to your AP. After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig":"to continue the configuration.
  • Page 5 You will then return to the previous page. The security mode will be selected automatically, please confirm it and enter the password that is the same as on your router or access point." Click Pgzv" The setup for YFU"Tgrgcvgt mode is similar to that of Wpkxgtucn Tgrgcvgt Note mode.
  • Page 6 The window displaying a list of available SSIDs will appear. Find the SSID of the root Access Point / Router that you want to bridge, and then click" Eqppgev in the corresponding row. You will then return to the previous page. The security mode will be selected automatically, please confirm it and enter...
  • Page 7 Ugvvkpiu" Click Uwtxg{" The window displaying a list of available SSIDs will appear. Find the SSID of the Access Point / Router or WISP, and click Eqppgev in the corresponding row. You will then return to the previous page. Select the security mode and enter the password that is the same as on the root AP."...
  • Page 8 Ugvvkpiu" You can create up to 4 SSIDs and rename them here." Select Tgikqp and Ejcppgn. Configure the wireless security for each SSID here. Click Ucxg to apply the current security settings for the selected SSID. Click Pgzv" For the configuration of VLAN, please refer to the User Guide on the Note Resource CD.
  • Page 9 Hkpkuj" After Network Settings, the Finish page will appear. Here takes the settings for Access Point mode for example. Check your settings and click Ucxg to save your settings for future reference." Click Hkpkuj" Click QM" Wait until the device restarts successfully.
  • Page 10 V30"Jqy"fq"K"tguvqtg"o{"Ceeguu"Rqkpv‚u"eqphkiwtcvkqp"vq"kvu"hcevqt{"fghcwnv"ugvvkpiuA With the Access Point powered on, " use a pin to press and hold the TGUGV button on the rear panel for 5 to 8 seconds before releasing it. Hold it in for 5 to 8 seconds Once the Access Point is reset, the current configuration settings will be lost Note and you will need to reconfigure the Access Point.
  • Page 11 Click Ejcpig"cfcrvgt"ugvvkpiu Right-click Nqecn"Ctgc" Eqppgevkqp" Click Rtqrgtvkgu" Double-click Kpvgtpgv" Rtqvqeqn" Xgtukqp" 6" *VER1KRx6+...
  • Page 12 Select Wug"vjg"hqnnqykpi"KR" cfftguu" Enter the 192.168.0.100 into the KR"cfftguu field, 255.255.255.0 into the Uwdpgv"ocum field Click QM" Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the configuration page, please restore your Access Point’s factory default settings and reconfigure your Access Point following the instructions of this QIG.
  • Page 13: Appendix A: With Poe Setup

    Passive PoE Injector supports a maximum cable length up to 30 meters Note due to the environment. For longer powered cable up to 100 meters, please choose TP-LINK's 48V PoE adapters: TL-POE200 or TL-POE150S & TL-POE10R. Product information can be found on our official website...
  • Page 14 08:00 AM to 08:00 PM Vwtmg{" Kpfqpgukc" Tel: (+62) 021 6259 135 Tel: 444 19 25 (Turkish Service) E-mail : support.id@tp-link.com E-mail: support.tr@tp-link.com Service time : Monday to Friday Service time: 9:00 AM to 6:00 PM 9:00 -12:00; 13:00 -18:00...