Network; Lan - TP-Link TL-WA901ND User Manual

Chapter 4
2. Enter the access point's current PIN on your client device to join the access point's Wi-Fi

network.

4. 3. Network
4. 3. 1.

LAN

1. Visit http://tplinkap.net, and log in using
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• Type - Either select
to configure IP address manually.
• IP Address - Enter the IP address in dotted-decimal notation if your select
(factory default - 192.168.0.254).
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
• Gateway - The gateway should be in the same subnet as your IP address.
Note:
• If you have changed the IP address, you must use the new IP address to login.
admin
Smart IP(DHCP) to get IP address from DHCP server, or
Configure the Access Point
(all lowercase) for both username and password.
Static IP
Static IP
24