TP-Link TL-WA901ND User Manual page 26

Chapter 4
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been successfully
added to the access point's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select Enter the new device's
click Connect.
3. A success message will appear on the WPS page if the client device has been successfully
added to the access point's network.
Method Three: Enter the Access Point's PIN
1. Keep the WPS Status as
Enabled and click Add
PIN, enter your client device's current PIN in the
Enabled and get the Current PIN
Configure the Access Point
Device.
of the access point.
PIN filed and
23