TP-Link TL-WA901ND User Manual page 37

Chapter 4
• WPA/WPA2-Personal(Recommended) - Select WPA/WPA2 based on Radius Server.
• Version - You can select one of following versions.
• Automatic (Recommended)
the wireless station's capability and request.
• WPA-PSK - Pre-shared key of WPA.
• WPA2-PSK - Pre-shared key of WPA2.
• Encryption - You can select either Automatic(Recommended), TKIP or AES.
• Wireless password
Hexadecimal, the length should be between 8 and 64 characters; for ASCII, the
length should be between 8 and 63 characters.
• Group Key Update Period
The value can be either 0 or at least 30. Enter 0 to disable the update.
• WPA/WPA2-Enterprise
• Version - You can select one of following versions.
• Automatic - Select WPA or WPA2 automatically based on the wireless station's capability and
request.
• WPA - Wi-Fi Protected Access.
• WPA2 - WPA version 2.
• Encryption - You can select either Automatic, TKIP or AES.
• Radius Server IP
• Radius Port
• Radius password
• Group Key Update Period
The value can be either 0 or at least 30. Enter 0 to disable the update.
• WEP - Select 802.11 WEP security.
• Type - You can select one of following types.
• Automatic - Select Shared Key or Open System authentication type automatically based on
the wireless station's capability and request.
• Shared Key - Select 802.11 Shared Key authentication type.
• Open System
• WEP Key Format
stands for any combination of keyboard characters in the specified length.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f,
A-F) in the specified length.
• WEP Key - Select which of the four keys will be used and enter the matching
WEP key information for your network in the selected key radio button. These
values must be identical on all wireless stations in your network.
- Select WPA-Personal or WPA2-Personal automatically based on
- You can enter ASCII or Hexadecimal characters. For
- Specify the group key update interval in seconds.
- Select WPA/WPA2 based on Radius Server.
- Enter the IP address of the Radius Server.
- Enter the port used by radius service.
- Enter the password for the Radius Server.
- Specify the group key update interval in seconds.
- Select 802.11 Open System authentication.
- You can select ASCII or Hexadecimal format. ASCII format
Configure the Access Point
34