Update Firmware; Figure 97 : Hyper Terminal Main Menu - AVE VSI-Pro Max Operation Manual

PROGRAMMING
VSI-Pro Firmware Download Menu
To update the VSI-Pro Max, load the VSI-Pro Max Firmware Download Utility and follow the instructions below.
Then select "UPDATE FIRMWARE" from the menu selection.
Figure 96: Update Firmware
Sub-Menu
VSI-Pro Max Firmware Download Utility
This document describes the VSI-Pro Max V14 Release 12. This feature allows a user to download firmware update
via the RS-232 port. The LDROM 4K boot strap loader must be burner to the uP via a conventional programmer.
Then the executable program is then loaded via any terminal program such as Hyper Terminal via a PC or compat-
ible device. All firmware files are encoded to the AVE proprietary format and decoded by the bootstrap loader for
standard program execution.
Update Firmware of VSI-Pro Max
You have to connect the VSI-Pro Max with a Serial Program Terminal such as HyperTerminal, IC etc. But advise to
use HyperTerminal.First, you have to set the baud rate HyperTerminal to 19200
See PC Windows below to verify proper HyperTerminal setup.
VSI-Pro Max POS / Cash Register Interface
DOWNLOAD SETUP
UPLOAD SETUP

UPDATE FIRMWARE

EXIT
Figure 97: HyperTerminal Main Menu
56