AVE VSI-Pro Max Operation Manual page 79

APPENDIX M
Remote Keyboard
This function allows the user to select the appropriate VSI-Pro Max on the network with the Select Address setting.
Once this is done you then click "Programming". The Vnetworker will then signal the VSI-Pro to exit the register
interface mode and go to the programming mode. Note: While in this mode all data from the cash register will not be
stored or displayed in the VSI-Pro and will be lost.
After a brief pause, communication is established with the VSI-Pro and the following menu will be displayed. This is
the same as the on-screen menu and using the "Up", "Down", "Enter" buttons you can navigate the VSI-Pro menu
just like at the local pushbuttons.
Control Button
• Programming
• Up
• Down
• Enter
• Erase Character
• Save String Input
• Reset
VSI-Pro Max POS / Cash Register Interface
Figure 145 : Remote Keyboard
79
RS-485 VNETWORKER
Address Select :
You should select the address for
Programming, then press the
Programming Button