Text Display; Screen Blank; Display Lines; Display Format - AVE VSI-Pro Max Operation Manual

PROGRAMMING

5.5 TEXT DISPLAY

This menu will give you more control over the actual text block formatting and its appearance on the screen.Toaccess
the menu, press the "Up" or "Down" button to move the cursor to "TEXT DISPLAY" and press "Set". The following
sub-menu will appear:

SCREEN BLANK

Choices: NONE, 6, 12, 20, 30, 60, 120, 180, 300
This is the amount of time that the VSI-Pro text display will remain on-screen after a transaction before blanking itself
off (not the video picture, just the register transaction data) until the next transaction.
To change the SCREEN BLANK setting, press the "Up" or "Down" button to move the cursor to "SCREEN BLANK"
and press "SET". The cursor will begin flashing. Press the "Up" or "Down" buttons to cycle through the selections.
Press "Set" when the desired time is displayed. The cursor will stop flashing and you may continue programming.
NOTE

DISPLAY LINES

You have the choice of how many lines of text to display on-screen for register transactions. The choices are up to
11 lines.
To change the DISPLAY LINES setting, press the "Up" or "Down" button to move the cursor to "DISPLAY LINES" and
press "Set". The cursor will begin flashing. Press the "Up" or "Down" buttons to cycle through the selections. Press
"Set" when the desired number is displayed. The cursor will stop flashing and you may continue programming.
NOTE
All register transaction data will scroll up regardless of the number of lines you choose to
display on-screen and the more lines you display on-screen, the greater the amount of time that the
transaction data will be recorded. However, some applications may limit the number of lines and the
size of the on-screen display. If you are using an on-screen title, it will occupy Line 1, leaving 10 lines
for the text insertion. If you enable the on-screen Time/Date then this takes one additional line also.
DISPLAY CHARACTER / LINE
This setting allows you to change the number of characters per line from 10 to 40.
VSI-Pro Max POS / Cash Register Interface
SCREEN BLANK
DISPLAY LINES
DISPLAY CHARACTER/LINE

DISPLAY FORMAT

LINE COMPRESS

SPACE COMPRESS

LEFT JUSTIFIED

SCROLL DELAY

DISPLAY
EXIT
Figure 61: Text Display Sub-Menu
Choosing "NONE" means No Blanking. The VSI-Pro will display the last
transaction until a new transaction is performed.
28
20
10
40
TOP
OFF
OFF
OFF
OFF
ON