Settings Menu - Epson EH-LS10500 User Manual

Configuration Menu

Settings menu

Function
Keystone -60 to 60
HDMI Link Device Connections -
HDMI Link
Power On Link
Power Off Link
Lock Setting Lens Lock
Child Lock
Control Panel Lock
Menu/Settings
On, Off
Off, Bidirectional,
Device -> PJ, PJ ->
Device
On, Off
On, Off
On, Off
On, Off
73
Explanation
Performs vertical keystone correction.
Displays a list of devices connected to the
HDMI1 or HDMI2 ports.
Enables or disables the HDMI Link function.
Sets the link function when the power is turned
on.
Set to power on the projector when content is
played on a connected device (Bidirectional or
Device -> PJ) or to power on a connected device
when the projector is turned on (Bidirectional or
PJ -> Device).
Sets whether or not to power off connected de-
vices when the projector is turned off.
When set to On, the focus, zoom, and lens shift
settings are locked at their current settings.
If you press the button when Lens Lock is
set to On, is displayed on the screen.
This locks the button on the projector's con-
trol panel to prevent children from turning on
the projector by accident. You can turn on the
power when locked by holding down the
button for approximately three seconds. You can
still turn off the device using the
perform operations with the remote control as
usual.
If changed, this setting is enabled after you pow-
er off the projector and the cool-down process is
complete.
Note that even if Child Lock is set to On, the pro-
jector still turns on when the power cord is con-
nected if Direct Power On is set to On.
When set to On, all buttons on the control panel
except for the button are disabled.
displayed on the screen if any buttons are press-
ed. To unlock, press and hold the
the control panel for at least 7 seconds.
If changed, this setting is enabled once you close
the Configuration menu.
p.31
s
button, or
is
button on