Memory Function; Settings That Can Be Saved; Saving The Memory - Epson EH-LS10500 User Manual

Useful Functions

Memory Function

Settings that can be Saved

You can save some settings for the Configuration menu (Save Memory).
By saving settings, you can load settings made for specific images or scenes from the remote control (Load
Memory).
You can save the following Configuration menu settings.
Color Mode, Power Consumption, Brightness, Contrast, Color Saturation, Tint, Sharpness,
Image
Color Temp., Skin Tone, Dynamic Contrast
p.68
s
Advanced
Deinterlacing, Motion Detection, Super-resolution/4K, Detail Enhancement
Signal
p.70
s
Advanced

Saving the Memory

a
Make settings that you want to save to
the Configuration menu.
b
Press the
c
Use the
select Save Memory, and then press
the button to confirm the
selection.
The Save Memory screen is displayed.
Sharpness, Offset, Gain, Gamma, Hue, Saturation, Brightness, EPSON Super
White
Noise Reduction, Setup Level, Overscan, HDMI Video Range
button.
buttons to
d
Use the
select the memory name to be saved,
and then press the
confirm the selection.
The current projector settings are saved as
a memory.
If the mark on the left of the memory name
is turned green, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select Yes, the
previous settings are deleted and the
current settings are registered.
c
You can save up to 10 memories.
58
buttons to
button to