Epson EH-LS10500 User Manual page 94

Troubleshooting
Check
Does the connected device meet the HDMI
CEC standards?
Are the cables connected correctly?
Is the power for the amplifier or DVD/Blu-ray
disc player and so on turned on?
Was a new device connected, or was the con-
nection changed?
Are many multi-media players connected?
The device name is not displayed under Device Connections
Check
Does the connected device meet the HDMI
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, press the button, and then check if the device is
available under Device Connections.
Check that all the cables required to use HDMI Link are securely
connected. p.54
s
Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
93
Remedy
p.54
s
Remedy