Table of Contents
Advertisement
Basic Operations
Horiz. Squeeze stretches the horizontal aspect of the input signal. This allows you to project across the full
width of the screen when using a commercially available anamorphic lens.
c
•
If Anamorphic Wide is selected when Overscan is set, the image may be truncated. Set Overscan to
Off.
Signal - Advanced - Overscan
s
•
When projecting 3D images in Anamorphic Wide, only 1080p/24 Hz/frame packing signals are
supported.
•
When a 4K image signal is being input, you can only select Normal, Anamorphic Wide, and Horiz.
Squeeze.
Hiding the Image Temporarily
You can use this to temporarily hide the image on the screen.
Press the
button to show or hide the image.
c
•
Because moving images continue to play even when they are hidden, you cannot return to the point
at which you hid the images using the
•
If the
button is pressed while the Configuration menu is displayed, the menu is temporarily
hidden, and
•
If you press the
confirmation message is displayed asking if you want to turn off the projector. Press the
again to turn off the projector.
p.70
is displayed at the top-right of the screen.
button on the remote control or the control panel while the image is hidden, a
button.
34
button
Advertisement
Table of Contents
