Switching The Source; Aspect - Epson EH-LS10500 User Manual

Basic Operations
c
•
The projected screen becomes smaller when correcting keystone distortion. Increase the projection
distance to fit the projected screen to the screen size.
•
You can make keystone settings from the Configuration menu.
•
You can make effective corrections within a projection angle of 30° top to bottom.
•
For position adjustment, you can maintain the quality of the projected image by performing correction
using lens shift. Use keystone when you cannot make adjustments using lens shift.

Switching the Source

You can change the source using the following method.
Press the button for the target port.
c
•
You can also change the source by pressing the
•
For video devices, start playback first and then change the source.
•
If the color looks unnatural when changing to a Video or Component source, check that the port you
have connected to is the same as the Input Signal.
Component p.73

Aspect

You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection
screen.
The available Aspect varies depending on the image signal currently being projected.
c
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for commercial purposes or for public viewing may infringe upon the rights of the copyright
holder of that image based on copyright law.
Settings - Keystone
s
button on the control panel.
Settings - Input Signal - Video Signal/
s
32
p.73