Computers With An Rgb Output Port; Computers With An Hdmi Output Port; Connecting External Devices; Connecting To Trigger Out 1/Trigger Out 2 Ports - Epson EH-LS10500 User Manual

Preparing

Computers with an RGB output port

Computers with an HDMI output port

To prevent the weight of the HDMI cable disconnecting it from the port, make sure you secure it to the cable
holder with the HDMI cable clamp.
c
When projecting images in HDCP 2.2, connect to the HDMI1 port.

Connecting External Devices

Connecting to Trigger out 1/Trigger out 2 ports

To connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm).
When set to on, a signal (12 V DC) is output from this port to communicate the projector's status (on/off) to
connected devices such as electric screens.
c
When using the Trigger out 1/Trigger out 2 ports, set Trigger Out 1/Trigger Out 2.
Operation - Trigger Out 1/Trigger Out 2 p.73
22
Settings -
s