Switching The Image Source - Epson EH-TW9100W User Manual

Useful Functions
c
Point the remote control at the WirelessHD Transmitter, and then press the
Depending on the output target, the WiHD indicator on the WirelessHD Transmitter indicates the
following status.
On: The image is being output to the projector.
Off: The image is being output to another output device.
The output target projected last time is projected the next time the projector is turned on.
c
You can switch to the other output device even when the projector is off.

Switching the image source

You can switch the image source for the AV device connected to the WirelessHD Transmitter. When switching,
each input source is displayed on one screen as a preview. This allows you to switch easily between image
sources even when two or more devices are connected using HDMI.
The projector uses Insta Prevue Technology from Silicon Image, Inc.
Remote control
60
button.
WirelessHD Transmit-
ter