Q Quiet Mode; Result Code Form; I Identification; Crok Send Ok Response To <Cr - NetComm NTC-6000 Series Command Manual

Q Quiet mode
Whilst in command mode, controls whether the terminal will send result codes and
unsolicited responses to the host.
NB this does not suppress the terminal from sending solicited responses.
Default:
Command values:
Q0 Send result codes and unsolicited responses.
Q1 Do not end result codes and unsolicited responses.
V

Result code form

Selects whether the terminal sends long form (verbose) or short-form (numeric)
responses to the host.
Default:
Command values:
V0 Send short form (numeric) codes.
V1 Send long form (verbose) result codes.
I Identification
Reports information to the host that may be used to help identify the product.
Default:
Command values:
I0 Report product identity.
I1 Report software version.
^CROK Send OK response to <CR>
Enables or disables sending of an OK response when the unit receives the <CR>
character by itself.
Default:
Command values:
^CROK=0 Do not send OK in response to <CR>
^CROK=1 Send OK in response to <CR>
NTC-6000 Series V.250 Manual
To suit software version 1.1.0
1 Storage: &W Command
1 Storage: &W Command
0
0 Storage: &W Command
Page 10 of 32
7/21/2010