Ping Ping An Ip Address; Ltph Periodically Ping An Ip Address - NetComm NTC-6000 Series Command Manual

^PING Ping an IP address
This command performs a ping for a given IP address or domain name.
Default: N/A
Command values:
^PING= <domain name or IP address>
^LTPH Periodically Ping an IP address
This command performs a periodic ping for a given IP address or domain name.
Default: ^LTPH: ,,0,0,0,-1
Command values:
^LTPH = <Address 1>,
<Address 2>,
<timer>,<acceleration timer>,<failure count>
Where:
<Address 1>
<Address 2>
<timer>
<acceleration timer> The periodic time in secs to revert to if a ping fails
<failure count>
^LTPH? Queries ltph configuration
Where:
<Address 1>
<Address 2>
<timer>
<acceleration timer> The periodic time in secs to revert to if a ping fails
<failure count>
<reset count>
NTC-6000 Series V.250 Manual
To suit software version 1.1.0
Storage: NA
Ping the domain name or IP address
Storage:
Primary address to ping
Backup address to ping
The periodic time to ping in secs (e.g. every 60 seconds)
The number of pings that can fail to trigger a reboot.
Primary address to ping
Backup address to ping
The periodic time to ping in secs (e.g. every 60 seconds)
The number of pings that can fail to trigger a reboot.
The number of times the modem has been reset.
Page 29 of 32
7/21/2010
Automatic