Genie Z-45 Operator's Manual page 45

Fourth Edition • First Printing
Securing to Truck or Trailer
for Transit
Always use the turntable
rotation lock pin each time
the machine is
transported. The lock pin
is located under the
turntable on the hydraulic
tank side of the machine.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Securing the Chassis
Use chains of ample load capacity.
Use a minimum of 4 chains.
Adjust the rigging to prevent damage to the chains.
Part No. 114358 Z-45/25 DC • Z-45/25J DC • Z-45/25 Bi-Energy • Z-45/25J Bi-Energy
Transport and Lifting Instructions
Securing the Platform - Z-45/25
Make sure the platform is in the stowed position.
Secure the platform with a nylon strap placed over
the platform mount near the platform rotator (see
below). Do not use excessive downward force when
securing the boom section.
lock pin
Securing the Platform - Z-45/25J
Make sure the jib and platform are in the stowed
position.
Secure the platform with a nylon strap placed over
the platform mount near the platform rotator (see
below). Do not use excessive downward force
when securing the boom section.
Operator's Manual
43