Genie Z-45 Operator's Manual page 15

Fourth Edition • First Printing
Bodily Injury Hazard
All models:
Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Improper contact with components under any cover
will cause serious injury. Only trained maintenance
personnel should access compartments. Access
by the operator is only advised when performing a
pre-operation inspection. All compartments must
remain closed and secured during operation.
Bi-Energy models:
When the engine is running, operate the machine in
a well-ventilated area to avoid carbon monoxide
poisoning.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Conduct a thorough pre-operation inspection of the
machine and test all functions before each work
shift. Immediately tag and remove from service a
damaged or malfunctioning machine.
Be sure all maintenance has been performed as
specified in this manual and the appropriate service
manual.
Be sure all decals are in place and legible.
Be sure the operator's, safety and responsibilities
manuals are complete, legible and in the storage
container located on the platform.
Part No. 114358 Z-45/25 DC • Z-45/25J DC • Z-45/25 Bi-Energy • Z-45/25J Bi-Energy
Component Damage Hazard
All models:
Do not use the machine as a ground for welding.
Bi-Energy models:
Do not use any battery or charger greater than 12V
to jump-start the engine.
Operator's Manual
Work Area Safety
13