Siemens SINUMERIK 840D sl Configuration Manual page 75

Procedure
To export PLC symbols for SINUMERIK Operate, proceed as follows:
1. In the project tree, right-click on the PLC or NCU and select the "Export PLC symbols for
SINUMERIK Operate " in the shortcut menu.
The "Export PLC symbols for SINUMERIK Operate" dialog opens.
2. Enter the settings:
– Select the languages whose PLC symbols you want to export. Only those languages
– Select the storage location in which the exported PLC symbols are to be saved. Use,
3. Click "Export" to start the export operation.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017
that you previously selected under "Project languages" are actively displayed.
Note
Comments only in German or English
Because SINUMERIK Operate can manage only German and English comments, you
can export only German and English comments from the TIA Portal.
for example, a USB FlashDrive to subsequently copy the files to the NCU.
3.10 Exporting PLC symbols for SINUMERIK Operate
Programming the PLC
75