Exporting Ts Files From Sinumerik Operate - Siemens SINUMERIK 840D sl Configuration Manual

Importing user alarms

8.2 Exporting TS files from SINUMERIK Operate

8.2 Exporting TS files from SINUMERIK Operate
This chapter describes how you export the DB2 alarms using the user interface of
SINUMERIK Operate.
If you have installed SINUMERIK Operate on a Siemens PC system, you can alternatively
copy the files via the Windows Explorer.
Example for PCU 50.5 with SINUMERIK Operate for SINUMERIK 840D sl:
● C:\Program Files (x86)\Siemens\MotionControl\oem\Sinumerik\hmi\lng\
Precondition
● A USB flash drive is inserted at a PC system with SINUMERIK Operate.
● In SINUMERIK Operate, the USB port is activated under "Commissioning > HMI > Log.
Drive"
● Access rights of access level 3 (user) are available in SINUMERIK Operate.
Procedure
To copy TS files from SINUMERIK Operate, proceed as follows:
1. In SINUMERIK Operate select the screen "Commissioning > System data" – and in the
folder structure, navigate in the "HMI data/Texts/Manufacturer/" directory.
2. Select the required TS files and actuate the "Copy" softkey".
3. Select the directory structure of your USB flash drive and press the "Paste" softkey.
Result
The DB2 alarms were copied from SINUMERIK Operate as TS files.
154
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325