Siemens SINUMERIK 840D sl Configuration Manual page 31

2. To download the compiled configuration to the PLC, right-click "CNC_1" and select the
"Hardware configuration" command in the "Download to device" shortcut menu.
The "Extended download" dialog opens.
Figure 2-1 "Extended download" dialog: The configured access nodes of the PLC are displayed in the upper area.
3. Select the required module from "Compatible nodes in the target subnet". Alternatively,
you can specify an IP address directly in the "Compatible nodes in the target subnet" list
in the "Address" column.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
2.5 Loading and closing the hardware configuration in the PLC
Configuring the NCU
31