The Adjustment Settings - ATEN KL1108V User Manual

The Adjustment Settings

An explanation of the LCD OSD adjustment settings is given in the table
below:
Setting
Brightness
Contrast
Phase
Clock
H-Position
V-Position
Color Temperature
Language
OSD Duration
Reset
Adjusts the background black level of the screen image.
Adjusts the foreground white level of the screen image.
If pixel jitter or horizontal line noise is visible on the display, your
LCD may have the wrong phase setting. Adjust the phase setting
to eliminate these problems.
If vertical banding is visible on the display, your LCD may have
the wrong clock setting. Adjust the clock setting to eliminate
vertical banding.
Positions the display area on the LCD panel horizontally (moves
the display area left or right).
Positions the display area on the LCD panel vertically (moves
the display area up or down).
Adjusts the color quality of the display. You can adjust the
"warmth" value, color balance, etc. The Adjust Color selection
has a further submenu that lets you fine tune the RGB values.
Selects the language that the OSD displays its menus in.
Lets you set the amount of time that the OSD displays on the
screen. If there is no input for the amount of time you choose, the
OSD display turns off.
Resets the menu and submenu adjustments (except for
language settings) to the original factory default settings.
Chapter 3. Basic Operation
Explanation
36