Chapter 2. Hardware Setup; Before You Begin - ATEN KL1108V User Manual

Before You Begin

1. Important safety information regarding the placement of this
device is provided on page 227. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
3. Packing material has been inserted to protect the KL1108V /
KL1116V during shipping. Slide the LCD module out (see
Opening the Console, page 29), until the packing material is
visible. Remove the packing material before installing the unit,
as shown in the diagram below.
Hardware Setup
Chapter 2
16