3. Select the KL1108V / KL1116V in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want.
4. Select either Obtain an IP address automatically (DHCP), or Use the
following IP address. If you chose the latter, fill the IP Address, Subnet
Mask, and Gateway fields with the information appropriate to your
network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit. See IP
Installer, page 156 for more information.
Browser
1. Set your client computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the KL1108V / KL1116V.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the KL1108V / KL1116V that is suitable for
the network segment that it resides on.
After you log out, reset your client computer's IP address to its original value.
Appendix
234