ATEN KL1108V User Manual page 267

Problem
I have installed the
latest Java JRE, but
I am having
performance and
stability problems.
After upgrading the
firmware, after
logging in with the
Java Client Viewer
or the Java Client
AP, the switch
appears to still be
using the old
firmware version.
The national
language
characters that I
input do not appear.
Java performance
deteriorates.
Pressing the
Windows Menu key
has no effect.
When I try to Add a
folder to be
mounted as a virtual
media drive, I can't
select the folder. My
only choice is
Desktop.
I can't connect to
the KVM over IP
switch.
I have installed the
latest Java JRE, but
I am having
performance and
stability problems.
There may be issues with the latest version because it is so new.
Try using a Java version that is one or two versions earlier than
the latest one.
Log out. Delete your Java temporary internet files as follows:
1. Open Control Panel
2. In the Temporary Internet Files section, click Settings.
3. In the Disk Space section, click Delete Files.
4. In the dialog box that comes up, click OK.
Change the keyboard language of your client computer to
English-UK.
Use the KVM over IP switch On-Screen Keyboard and set the
on-screen keyboard to the same language that the other system
is using. (See The On-Screen Keyboard, page 83.)
Exit the program and start again.
Java doesn't support the Windows Menu key.
In the folder selection entry field, enter the root directory of the
folder you want to add. After that, the folders contained under the
root directory will display. You can now navigate to the folder you
want to select.
1. The latest Java version must be installed on your client com-
puter.
2. Check if you need to specify the Program port along with the
IP address. See Java Client AP Login, page 50 for details
3. Close Java reopen it, and try again.
There may be issues with the latest version because it is so new.
Try using a Java version that is one or two versions earlier than
the latest one.
Resolution
→
Java.
Appendix
250