Starting Up - ATEN KL1108V User Manual

KL1108V / KL1116V User Manual

Starting Up

To start the Log Server, either double click the program icon, or key in the full
path to the program on the command line. The first time you run it, a screen
similar to the one below appears:
Note: 1. The MAC address of the Log Server computer must be specified in
the ANMS settings.
2. The Log Server requires the Microsoft Jet OLEDB 4.0 driver- if the
program doesn't start.
The screen is divided into three components:
A Menu Bar at the top
A panel that will contain a list of Matrix KVM switches in the middle.
A panel that will contain an Events List at the bottom
Each of the components is explained in the sections that follow.
219