Wireless Security; Figure 89 Network > Wlan > Port Roles: Change Complete; Table 53 Network > Wlan > Port Roles - ZyXEL Communications ZyWall 5 Series User Manual

The following table describes the labels in this screen.
Table 53 NETWORK > WLAN > Port Roles
LABEL
LAN
DMZ
WLAN
Apply
Reset
After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few
seconds until the following screen appears. Click Return to go back to the Port Roles screen.
Figure 89 NETWORK > WLAN > Port Roles: Change Complete

10.6 Wireless Security

Wireless security is vital to your network to protect wireless communication between wireless
stations, access points and other wireless.
The figure below shows the possible wireless security levels on your ZyWALL. EAP
(Extensible Authentication Protocol) is used for authentication and utilizes dynamic WEP key
exchange. It requires interaction with a RADIUS (Remote Authentication Dial-In User
Service) server either on the WAN or your LAN to provide authentication service for wireless
stations.
Chapter 10 Wireless LAN
DESCRIPTION
Select a port's LAN radio button to use the port as part of the LAN. The port will
use the LAN IP address.
Select a port's DMZ radio button to use the port as part of the DMZ. The port will
use the DMZ IP address.
Select a port's WLAN radio button to use the port as part of the WLAN.
The port will use the WLAN IP address.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5/35/70 Series User's Guide
197