ZyWALL 5/35/70 Series User's Guide
13.2 General Setup
Use this screen to enable IDP on the ZyWALL and choose what interface(s) you want to
protect from intrusions.
Click SECURITY > IDP from the navigation panel. General is the first screen as shown in
the following figure.
Figure 132 SECURITY > IDP > General
The following table describes the labels in this screen.
Table 74 SECURITY > IDP > General Setup
LABEL
General Setup
Enable Intrusion
Detection and
Protection
Turbo Card
256
DESCRIPTION
Select this check box to enable IDP on the ZyWALL. When this check box is
cleared the ZyWALL is in IDP "bypass" mode and no IDP checking is done.
This field displays whether or not a ZyWALL Turbo Card is installed.
Note: You cannot configure and save the IDP and Anti-Virus
screens if the ZyWALL Turbo Card is not installed.
Chapter 13 Configuring IDP