Figure 181 Security > Vpn > Vpn Rules (Ike) > Move Network Policy; Table 97 Security > Vpn > Vpn Rules (Ike) > Move Network Policy - ZyXEL Communications ZyWall 5 Series User Manual

• The gateway policy contains the IKE SA settings. It identifies the IPSec routers at either
end of a VPN tunnel.
• The network policy contains the IPSec SA settings. It specifies which devices (behind the
IPSec routers) can use the VPN tunnel.
Use this screen to associate a network policy to a gateway policy.
Figure 181 SECURITY > VPN > VPN Rules (IKE) > Move Network Policy
The following table describes the labels in this screen.
Table 97 SECURITY > VPN > VPN Rules (IKE) > Move Network Policy
LABEL
Network Policy
Information
Name
Local Network
Remote Network
Gateway Policy
Information
Gateway Policy
Apply
Cancel
Chapter 18 IPSec VPN
DESCRIPTION
The following fields display the general network settings of this VPN policy.
This field displays the policy name.
This field displays one or a range of IP address(es) of the computer(s) behind the
ZyWALL.
This field displays one or a range of IP address(es) of the remote network behind
the remote IPsec router.
Select the name of a VPN rule (or gateway policy) to which you want to associate
this VPN network policy.
If you do not want to associate a network policy to any gateway policy, select
Recycle Bin from the drop-down list box. The Recycle Bin gateway policy is a
virtual placeholder for any network policy(ies) without an associated gateway
policy. When there is a network policy in Recycle Bin, the Recycle Bin gateway
policy automatically displays in the VPN Rules (IKE) screen.
Click Apply to save the changes.
Click Cancel to discard all changes and return to the main VPN screen.
ZyWALL 5/35/70 Series User's Guide
347