PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 42

Maintenance
- Remove the screw fixing the SAS valve to the
flywheel cover, indicated in the photograph.
- Remove the 6 flywheel cover screws indicated in
the photograph and remove the flywheel cover.
- Remove the filter indicated in the photograph
- Check that the gasket is in good conditions
- Check the SAS filter housing for dents or defor-
mations
- Clean the SAS filter carefully. Replace the filter if
it is damaged or deformed.
To refit, carry out the removal operations but in re-
verse order.
CAUTION
WHEN TRAVELLING ON DUSTY ROADS, THE
AIR FILTER MUST BE CLEANED MORE OFTEN
THAN SHOWN IN THE SCHEDULED MAINTE-
NANCE CHART.
CAUTION
NEVER RUN THE ENGINE WITHOUT THE SEC-
ONDARY AIR FILTER
MAIN - 8
Vespa LX 125 - 150 4T Euro 3