PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 132

Engine
Locking torque 11 ÷ 13
- Lubricate the flywheel oil seal.
- Use the appropriate tool to assemble the oil seal.
- Fit a new O-ring on the pre-filter and lubricate it.
- Insert the pre-filter on the engine with its corre-
sponding cover to the specific torque.
N.B.
REMOVE ANY EXCESS FROM THE CRANK-
CASE COUPLING GASKET ON THE CYLINDER
PLANE, TO ENSURE BETTER SEALING PER-
FORMANCE.
N.B.
FAILURE TO USE THE SPECIFIC TOOL CAN
RESULT IN AN INCORRECT DEPTH POSITION
AND AS A CONSEQUENCE IN INADEQUATE
OIL SEALING.
Specific tooling
020425Y Punch for flywheel-side oil seal
Locking torques (N*m)
Locking torque 24 ÷ 30
Lubrication
ENG - 48
Vespa LX 125 - 150 4T Euro 3