PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 147

Vespa LX 125 - 150 4T Euro 3
Engine
- Remove the oil pump seal.
- Remove the intake and outlet valves of the intake
pump from the tank
N.B.
CAUTION, THE ACCELERATION PUMP
VALVES ARE MADE UP OF NOZZLES, SPRING
AND BALL.
N.B.
AVOID REMOVING THE PISTON OF THE PUMP
AND ITS CONTROL.
Adequately support the carburettor and using a
rod and hammer remove the float pin acting from
the throttle control side.
- Remove the float and the plunger.
- Remove the maximum nozzle
-Remove the maximum nozzle.
ENG - 63