PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 96

Engine
Specific tooling
020444Y Tool for fitting/ removing the driven
pulley clutch
020444Y011 adapter ring
020444Y009 46x55 Wrench
Locking torques (N*m)
Nut locking clutch unit on pulley 55 ÷ 60 Nm
Refitting the driven pulley
- Reassemble the clutch bell and spacer.
Drive-belt
During the wear checks foreseen in the scheduled
maintenance services at 6,000 km, 18,000 km,
etc., check that the rim bottom of the toothing does
not show signs of incisions or cracking (see figure):
The rim bottom of the tooth must not have incisions
or cracking; if it does, change the belt.
- Check that the driving belt is not damaged.
- Check the width of the belt.
ENG - 12
Vespa LX 125 - 150 4T Euro 3