PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 162

Suspensions
Soap-based lithium grease with NLGI 3; ISO-L-
XBCHA3, DIN K3K-20
Refitting the front wheel
- When refitting, tighten the 5 screws to the speci-
fied torque
Locking torques (N*m)
Nut tightening torque 20 to 25 N•m
Handlebar
Removal
Remove the handlebar cover before carrying out
this operation,.
- After removing the transmissions and discon-
necting the electrical terminals, remove the termi-
nal fixing the handlebar to the steering.
- Check all components and replace faulty parts.
N.B.
IF THE HANDLEBAR IS BEING REMOVED TO
REMOVE THE STEERING, TILT THE HANDLE-
BAR FORWARD TO AVOIDING DAMAGING
THE TRANSMISSIONS.
Refitting
Carry out the operations in the reverse order to the
removal, observing the prescribed tightening tor-
que.
Locking torques (N*m)
Handlebar lock nut 45 ÷ 50
SUSP - 4
Vespa LX 125 - 150 4T Euro 3