PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 181

Vespa LX 125 - 150 4T Euro 3
0.5 mm thickness difference in the residual friction
material is permitted
Refitting
- Insert the brake pads
- Insert the fixing pin being careful to position the
clip with the ends towards the bleed screw as in
the photo.
- Insert the lock on the bolt and then the protection
cover
- Fix the rear brake calliper to the bracket and
tighten the two screws to the specified torque.
CAUTION
BEFORE USING THE BRAKE, OPERATE THE
LEVER A FEW TIMES.
Locking torques (N*m)
Rear brake calliper tightening screw 20 ÷ 25
Nm
Fill
Braking system
BRAK SYS - 7