Centre-Stand - PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual

Suspensions
Removal
- To replace the shock absorber remove the bat-
tery access flap to reach and remove the shock
absorber/ frame anchoring nut. Then remove the
shock absorber/engine anchorage nut.
- When refitting, tighten the shock absorber/chas-
sis anchoring nut and the shock absorber/engine
pin to the prescribed torque.
Locking torques (N*m)
Shock absorber/engine pin torque 33 to 41
N·m Shock absorber/frame nut torque 20 to 25
Nm

Centre-stand

Replace complete stand
- Undo the screw marked in the figure.
- When refitting, secure to the prescribed torque.
Locking torques (N*m)
Centre stand screw 32 ÷ 40
SUSP - 16
Vespa LX 125 - 150 4T Euro 3