Installing An Hpe Smart Array P408I-P Controller Option - HP ProLiant DL360 Gen10 User Manual

• 4 LFF
9. Install the access panel (Installing the access panel on page 25).
10. Install the server in the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server (Powering up the server on page 24).

Installing an HPE Smart Array P408i-p Controller option

Prerequisites
Before installing this option, be sure you have the following:
• The components included with the hardware option kit
• T-15 Torx screwdriver
Procedure
1. Observe the following alerts:
84 Installing an HPE Smart Array P408i-p Controller option