Table of Contents
Advertisement
13. Install the access panel (Install the access panel).
14. Install the server in the rack.
15. Connect each power cord to the server.
16. Connect each power cord to the power source.
17. Power up the server (Power up the server).
Smart Array controller options
For more information on controllers, see the following information:
•
The controller data sheet on the Hewlett Packard Enterprise website (https://www.hpe.com/h20195/V2/
Getdocument.aspx?docname=a00017196enw)
•
The controller QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs).
Installing an HPE Smart Array P408i-a SR Gen10 Controller option
Prerequisites
Before installing this option, be sure that you have the following:
•
The components included with the hardware option kit.
•
T-15 Torx screwdriver.
Procedure
1.
Observe the following alerts:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
Hardware options installation
105
Advertisement
Table of Contents
