Chevrolet 1973 Overhaul Manual page 376

THRUST W ASH ER
Fig. 40T--Removing Center Support Thrust Washer
Disassembly of Gear Unit Assembly
NOTE: CL Model (spur gears) disassembly
procedure is identical as illustrated.
1. Remove center support assembly (fig. 39T).
2. Remove center support to reaction carrier thrust
washer (fig. 40T).
3. Remove center support to sun gear races and thrust
bearing.
C O N S T A N T BLEED
O R IF IC E P L U G
A U T O M A T IC T R A N S M IS S IO N
ROLLER CLUTCH
ASSEMBLY
REACTION
CARRIER
SUN
GEAR
PLASTIC GEAR
RING
OUTPUT
CARRIER
Fig. 41T-Rem oving Reaction Carrier and Roller
Clutch from Output Carrier
NOTE: One race may have been removed
with center support.
4. Remove reaction carrier and roller clutch assembly
(fig. 41T). Lift roller clutch assembly out of carrier.
5. Remove front internal gear ring from output
carrier assembly.
7A-73
OVERHAUL MANUAL