Lockout Clutch Assembly - Chevrolet 1973 Overhaul Manual

7 M - 6 8 CLUTCHES A ND M A N U A L T R A N S M IS S IO N S
Fig. 6F—Positioning T ransfer Case for Disassem bly
OIL TROUGH
Fig. 7F—Removing Oil Trough
halves together. Install retaining bolts and tighten
to specifications.
Lockout Clutch Assembly (Fig. 13F)
Disassembly
1. Remove front side gear from input shaft assembly
and remove thrust washer, roller bearings (123) and
spacers from front side gear bore. Note position of
spacers to facilitate reassembly.
2. Using snap ring pliers, remove the snap ring
S N A P R IN G
Fig. 8F—Removing D iffe re n tia l C a rrie r Snap Ring
Fig. 9F—Removing S hift Fork R eta in in g Pin
Fig. 10F—Removing or In sta llin g Poppet Ball Plug
OVERHAUL MANUAL